Electrical Fire Suppression Systems

Strikefire systems use a continuous linear sensor tube that reliably detects and actuates release of the extinguishing agent using pneumatic technology. It is more flexible, space efficient and cost effective versus alternative mechanical or electronic systems.

Small Electrical Control Cabinet Fire Suppression

Large Electrical Control Cabinet Fire Suppression

Electrical Switch Panels Fire Suppression

What are the benefits of an Electric Fire Suppression System?

Early fire detection

If a flame-up occurs, the heat of the fire causes the pressurized sensor tube to burst at the hottest spot (approx. 110°C).

Instant suppression

The sudden tube depressurization actuates the special pressure differential valve and instantly floods the entire cabinet area with the extinguishing agent.

Quality Components

All our components are manufactured and checked with ruthless scrutiny.

Easy to install

The flexible sensor tubing is easily installed inside the electrical cabinet - directly above the wires and circuity where a fire could start.

No Electrical Power

With no reliance on electrical power or any interfacing the systems are always ready to detect and operate regardless of electricity supply condition.

Rugged Design

Tested with almost all functional components constructed from stainless steel


Strikefire electrical equipment systems carry a robust warranty that's only possible because of the robust engineering and quality that goes into every product.


Installs directly INSIDE electrical cabinets – closer to where a fire can start


Already protecting thousands of installations worldwide

Strikefire Systems help protect your electrical assets.

Contact us for product enquiry

Electrical Fire Protection

Automatic Fire Suppression for Electrical Panels and Equipment is vital due to the high risk of potential fires. They are designed to offer uninterrupted support for your business but are often taken for granted. Not only is the critical function of the electrical cabinet compromised in a fire scenario it could spread to surrounding equipment causing devastating damage.

Outdated infrastructure, faulty wires, poor maintenance and overloaded circuits are all risk factors for electrical fire.

The key to minimal fire damage is early detection and suppression to provide fast fire protection. The Clean Agent fire suppression system from Strikefire is installed directly at the point of the fire risk providing faster detection and suppression than conventional external fire detection systems.

Strikefire has a solution that will directly protect your critical assets and safeguard your business continuity, this is achieved with the Automatic Clean Agent Fire suppression system.

The Clean Agent fire suppression technology offers protection for your Class A, B & C risks and can be designed to allow for leakage and certain ventilation conditions.

The proven pneumatic fire detection system requires no electricity to operate giving you full peace of mind that there is 24/7 protection with zero false alarms. It will quickly and safely detect and deliver the agent at any location the Strikefire Detection Tube is installed.

For further peace of mind, testing standards accurately verify the system’s performance, covering detailed and specific fire testing, discharge & flow testing along with gruelling temperature, ageing, leakage, burst and corrosion tests.

The system employs a specialist Clean Agent that provides rapid fire suppression, leaving no residue, non-corrosive and completely non-conductive. Combined with the detection and discharge at the source of the fire your system can be back up and running in no time.

Available in a range of fire extinguisher system sizes with modular or multi-zone protection methods, protecting your critical asset has never been so easy. Simple to transport replacements mean fast and extremely cost-effective full life cycle costs.

High Performance Electrical Fire Suppression Systems

Electrical Panels & Equipment fires will usually start out of sight and in an enclosed space. This means that the fire suppression system needs to be reliable and ready to protect your hazard in a fully autonomous configuration. This is why Strikefire put their systems through arduous testing programs.

Why Use Clean Agents For Electrical Panels?

Clean Agents are the leading choice for automatic fire suppression when rapid protection & zero clean-up is required for your sensitive electrical equipment. All systems are stored as a liquid and discharged as a gaseous vapour. They work at a molecular level by removing the thermal energy of a fire to an extent where the combustion reaction cannot sustain itself.

Strikefire’s Clean Agent range consists of Novec 1230 Fire Protection Fluid and FM-200 waterless fire suppressant. These can be discharged in both direct and indirect fire suppression systems.

All products are recognised and listed in standards such as ISO 14520 & NFPA 2001.

Strikefire Clean Agent extinguishing mediums all have the following approvals:

  • Underwriters Laboratories (UL)
  • Underwriters Laboratories of Canada (ULC)
  • Factory Mutual (FM)
New Project (55)